One UK made T shirt: the specification
An open source supply chain for one UK made T shirt. One published specification that any manufacturer can quote against and any buyer or distributor can order against. The first order is planned for 5,000 units in early 2027.
Contents
- 01 The garment
- 02 The fabric
- 03 Material per T shirt
- 04 The route, five stages
- 05 Volumes and planning tiers
- 08 How to take part
- 06 Cost assumptions by stage (manufacturers only)
- 07 Cost per T shirt, ex works (manufacturers only)
Online version: theclothingconsortium.co.uk/specification/. Progress is updated regularly on the blog.
Manufacturers only
The cost sections are shared with manufacturers who are quoting for the work. If you are a manufacturer and do not yet have the login, register your capacity or email manufacturing@theclothingconsortium.co.uk.
The garment
One adult crew neck T shirt in 200 gsm single jersey. Knitted, dyed, cut, sewn and finished in the United Kingdom, from imported yarn.
| Item | Specification |
|---|---|
| Product | Adult crew neck T shirt |
| Fabric | Single jersey |
| Finished weight | 200 gsm |
| Fibre | 100% cotton, combed, ring spun |
| Knitting | United Kingdom |
| Dyeing and finishing | United Kingdom |
| Cutting and sewing | United Kingdom |
| Yarn | Imported in phase one |
| Fit | Unisex |
| Sizes | 2XS, XS, S, M, L, XL, 2XL, 3XL |
| Colours | To be agreed |
Why the yarn is imported
UK cotton spinning has gone. Phase one is therefore described exactly as it is: knitted, dyed, cut, sewn and finished in the UK, with imported yarn. Rebuilding spinning in the UK is what sustained volume is for, and it is not claimed here.
Colours
Colours are to be agreed with buyers. White and coloured garments are costed separately, because a white garment is prepared and bleached rather than dyed. Both are shown on the cost per T shirt page, which is shared with manufacturers behind a login.
Sizes and measurements
Eight unisex sizes, from 2XS to 3XL. The size specification below is version 1 and, like the rest of the garment specification, is out for approval and testing.
| Code | Point of measure | Tolerance minus | Tolerance plus | Grade | 2XS | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A02 | Length, side neck point to hem, front | 1 | 1 | 2 | 69.5 | 71.5 | 73.5 | 75.5 | 77.5 | 79.5 | 81.5 | 83.5 |
| A01 | Length, side neck point to hem, back | 1 | 1 | 2 | 69.5 | 71.5 | 73.5 | 75.5 | 77.5 | 79.5 | 81.5 | 83.5 |
| B01 | Chest at armhole | 1 | 1 | 3 | 47 | 50 | 53 | 56 | 59 | 62 | 65 | 68 |
| C02 | Waist position from side neck point | 0.5 | 0.5 | 1 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 |
| C01 | Waist, straight across | 1 | 1 | 3 | 45 | 48 | 51 | 54 | 57 | 60 | 63 | 66 |
| E01 | Hem width, straight | 1 | 1 | 3 | 46.5 | 49.5 | 52.5 | 55.5 | 58.5 | 61.5 | 64.5 | 67.5 |
| E06 | Hem depth | 0 | 0 | 0 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| A10 | Twin needle stitch at hem and cuff | 0.5 | 0 | 0 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| G04 | Across shoulder, point to point | 0.5 | 0.5 | 2 | 41 | 43 | 45 | 47 | 49 | 51 | 53 | 55 |
| B02 | Across front, 15 cm from side neck point | 0.5 | 0.5 | 2 | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 |
| B03 | Across back, 15 cm from side neck point | 0.5 | 0.5 | 2 | 35.5 | 37.5 | 39.5 | 41.5 | 43.5 | 45.5 | 47.5 | 49.5 |
| H01 | Armhole, straight | 0.5 | 0.5 | 1 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 |
| G01 | Sleeve length from top of armhole | 0.5 | 0.5 | 2 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 |
| I01 | Bicep at underarm | 0.5 | 0.5 | 1 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 |
| I03 | Sleeve opening | 0.5 | 0.5 | 1 | 16.5 | 17.5 | 18.5 | 19.5 | 20.5 | 21.5 | 22.5 | 23.5 |
| I06 | Cuff depth | 0 | 0 | 0 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| J01 | Back neck width, including rib | 0.5 | 0.5 | 0.5 | 17 | 17.5 | 18 | 18.5 | 19 | 19.5 | 20 | 20.5 |
| J02 | Front neck drop, to seam | 0.5 | 0.5 | 0.3 | 10.1 | 10.4 | 10.7 | 11 | 11.3 | 11.6 | 11.9 | 12.2 |
| J04 | Back neck drop, to seam | 0 | 0 | 0 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 |
| J11 | Neck trim depth | 0 | 0 | 0 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| J16 | Minimum neck stretch | 0 | 0 | 0 | 32 | 32 | 32 | 32 | 32 | 32 | 32 | 32 |
All measurements are in centimetres. Tolerance is how far a finished garment may measure below or above the figure shown. Grade is the step between one size and the next. Size M is the base size from which the others are graded. On a phone, scroll the table sideways to see every size.
The fabric
The fabric that every knitter and dyer quotes against. Where a figure is still under review, it says so.
| Parameter | Value |
|---|---|
| Yarn count | Ne 18/1, combed, ring spun |
| Cotton | 100% BCI cotton (Better Cotton) |
| Machine gauge | 20 gauge, loose knit (under review) |
| Stitch length | Approximately 3.10 mm to 3.30 mm |
| Finished weight | 200 gsm |
| Measure | Tolerance |
|---|---|
| Weight | Plus or minus 5% |
| Shrinkage | Plus or minus 5% |
| Bow and skew | Plus or minus 5% |
| Colour fastness standard | To be confirmed |
Why the gauge is under review
The specification currently assumes a 20 gauge machine knitting a loose construction. Many UK knitters run 24 or 28 gauge machines. If a finer gauge can reach 200 gsm finished with the right handle and at the right cost, the specification should change to suit the machines that already exist in the UK, not the other way round.
Knitters: if your machines can meet this fabric on a different gauge, tell us how.
Material per T shirt
Worked backwards from the weight of cotton in the finished garment, allowing for the loss at each stage.
| Stage | Weight per T shirt | Loss assumed before the next stage |
|---|---|---|
| Yarn bought | 0.2524 kg | 1.5% yarn loss |
| Greige fabric | 0.2486 kg | 4% knit and dye loss |
| Finished fabric | 0.2386 kg | 12% cutting loss |
| In the garment | 0.2100 kg | Not applicable |
| Stage | Loss |
|---|---|
| Yarn | 1.5% |
| Knitting and dyeing, combined | 4% |
| Cutting | 12% |
These weights drive every tonnage on the volumes page and every per kilogram cost on the cost assumptions page. A better loss figure from a working factory improves all of them.
The route, five stages
Five stages from yarn to stock. Nobody has to cover all of them. A manufacturer can quote for a single stage.
| Stage | Name | What happens | Where |
|---|---|---|---|
| 01 | Yarn | Imported and landed in the UK | Spun abroad, landed in the UK |
| 02 | Knit | Greige fabric knitted to 200 gsm | United Kingdom |
| 03 | Dye | Dyed and finished in the UK | United Kingdom |
| 04 | Cut and sew | Cut, sewn, pressed, checked and packed | United Kingdom |
| 05 | Stock | Held by distributors for buyers | United Kingdom |
Why stock is a stage
A garment that is made but not held anywhere does not reach a customer. Between the factory and the buyer sits the party who holds the stock, and that is a trade in its own right. It is part of the route, not an afterthought.
Volumes and planning tiers
Four planning tiers. They are not orders. They show what the route has to carry at each level of sustained volume.
| T shirts | Yarn, tonnes | Greige fabric, tonnes | T shirts a week |
|---|---|---|---|
| 100,000 a year | 25.2 | 24.9 | About 1,900 |
| 250,000 a year | 63.1 | 62.1 | About 4,800 |
| 500,000 a year | 126.2 | 124.3 | About 9,600 |
| 1,000,000 a year | 252.4 | 248.6 | About 19,200 |
Planning tiers, not orders. Weekly figures assume 52 weeks. Tonnages use the weights on the material per T shirt page.
The first order
The first order is planned for 5,000 units in early 2027. The tiers show what the route needs once volume is sustained, so that every stage can see what it would be quoting for beyond the first run.
How to take part
Three roles make the route work. Each can take part without joining anything and without being named.
| Who | What they do | Register |
|---|---|---|
| Manufacturers | Quote against the specification for any stage: knitting, dyeing and finishing, or cut and sew. You do not need to cover more than one. | Register capacity |
| Distributors | Hold stock between the factory and the buyer. | Register as a distributor |
| Buyers | Commit forward volume, so that the order is real. | Register demand |
Nobody has to be named
Manufacturers, distributors and buyers can take part without being named publicly. There is no member list and no fee. A quote, a stock commitment or a forward order is what counts, not a logo on a web page.
What happens next
The first order is planned for 5,000 units in early 2027. Progress is updated regularly on the blog.